XTMH201 rotary MH hydrogen storage reaction machine:

The low-speed motor makes the hydrogen storage reaction machine in a low-speed rotation state.

The device features: 

(1) Induces the internal hydrogen storage alloy to move with a small-scale and non-directional movement effect, effectively prevents the powdered alloy from depositing downward, reduce the increasing risk of the compressive stress and cohesive force on the lower part of machine or tank, and the powdered alloy will be diffusely distributed in the reaction machine.

(2) To offset part of the friction force generated during the recovery process of the expansion and contraction of the machine body wall to the alloy, and to build a cycle of "close contact" and "departure" between the wall and the periodic alloy, significantly weakens the cyclic compression effect.

The packing density of metal particles in the machine is more uniform, the symptoms of powdered alloy compaction are obviously improved, the plastic deformation failure caused by excessive local stress in the bed body is greatly relieved, the service life of the reaction bed is prolonged, and the alloy packing rate and system hydrogen storage density are high.

XTMH202 fixed MH hydrogen storage reaction machine:

The characteristics of the device are: 

(1) The hydrogen storage material machine is efficiently coupled with the phase change material area, which can make full use of the high reaction heat generated by the hydrogen absorption and desorption of the Mg-Ni-based alloy, and reduce the additional energy consumption required for the operation of the hydrogen storage device; 

(2) Activated carbon and hydrogen storage alloy are uniformly mixed and filled, which is a double hydrogen storage carrier, which is conducive to heat and mass transfer in the process of metal absorption and desorption; 

(3) The gas chamber and the hydrogen storage material machine are connected by a bilateral external wire joint, which can quickly replace the storage part, without any damage to the machine, and the machine is light-weight and the system has high hydrogen storage density.

Product specification：